diff --git a/README b/README
index 0583520..b833aca 100644
--- a/README
+++ b/README
@@ -1477,19 +1477,6 @@
 - CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 		Use buffered writes to flash.
 
-- CONFIG_FLASH_SPANSION_S29WS_N
-		s29ws-n MirrorBit flash has non-standard addresses for buffered
-		write commands.
-
-- CONFIG_FLASH_VERIFY
-		If defined, the content of the flash (destination) is compared
-		against the source after the write operation. An error message
-		will be printed when the contents are not identical.
-		Please note that this option is useless in nearly all cases,
-		since such flash programming errors usually are detected earlier
-		while unprotecting/erasing/programming. Please only enable
-		this option if you really know what you are doing.
-
 - CONFIG_ENV_FLAGS_LIST_DEFAULT
 - CONFIG_ENV_FLAGS_LIST_STATIC
 	Enable validation of the values given to environment variables when
diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp
index 805fe93..ad61dab 100644
--- a/arch/Kconfig.nxp
+++ b/arch/Kconfig.nxp
@@ -1,5 +1,10 @@
+config FSL_TRUST_ARCH_v1
+	bool
+
 config NXP_ESBC
 	bool "NXP ESBC (secure boot) functionality"
+	select FSL_TRUST_ARCH_v1 if ARCH_P3041 || ARCH_P4080 || \
+		ARCH_P5040 || ARCH_P2041
 	help
 	  Enable Freescale Secure Boot feature. Normally selected by defconfig.
 	  If unsure, do not change.
@@ -10,6 +15,7 @@
 config CHAIN_OF_TRUST
 	select FSL_CAAM
 	select ARCH_MISC_INIT
+	select FSL_ISBC_KEY_EXT if (ARM || FSL_CORENET) && !SYS_RAMBOOT
 	select FSL_SEC_MON
 	select SPL_BOARD_INIT if (ARM && SPL)
 	select SPL_HASH if (ARM && SPL)
@@ -41,6 +47,17 @@
 	help
 	  For Layerscape based platforms, ESBC image Address in Header is 64bit.
 
+config FSL_ISBC_KEY_EXT
+	bool
+	help
+	  The key used for verification of next level images is picked up from
+	  an Extension Table which has been verified by the ISBC (Internal
+	  Secure boot Code) in boot ROM of the SoC.  The feature is only
+	  applicable in case of NOR boot and is not applicable in case of
+	  RAMBOOT (NAND, SD, SPI).  For Layerscape, this feature is available
+	  for all device if IE Table is copied to XIP memory Also, for
+	  Layerscape, ISBC doesn't verify this table.
+
 config SYS_FSL_SFP_BE
 	def_bool y
 	depends on PPC || FSL_LSCH2 || ARCH_LS1021A
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index a4f4961..6a9d198 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -9,21 +9,6 @@
 
 #ifdef CONFIG_CHAIN_OF_TRUST
 #ifndef CONFIG_SPL_BUILD
-#ifndef CONFIG_SYS_RAMBOOT
-/* The key used for verification of next level images
- * is picked up from an Extension Table which has
- * been verified by the ISBC (Internal Secure boot Code)
- * in boot ROM of the SoC.
- * The feature is only applicable in case of NOR boot and is
- * not applicable in case of RAMBOOT (NAND, SD, SPI).
- * For LS, this feature is available for all device if IE Table
- * is copied to XIP memory
- * Also, for LS, ISBC doesn't verify this table.
- */
-#define CONFIG_FSL_ISBC_KEY_EXT
-
-#endif
-
 #ifdef CONFIG_FSL_LS_PPA
 /* Define the key hash here if SRK used for signing PPA image is
  * different from SRK hash put in SFP used for U-Boot.
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 383af83..8f3aee0 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -4,6 +4,9 @@
 	def_bool y
 	depends on !TARGET_SMDKV310 && !TARGET_ARNDALE
 
+config SPI_BOOTING
+	bool
+
 config USB_BOOTING
 	bool
 
@@ -27,6 +30,7 @@
 	select BOARD_EARLY_INIT_F
 	select CPU_V7A
 	select SHA_HW_ACCEL
+	select SPI_BOOTING if EXYNOS5_DT
 	select USB_BOOTING
 	imply CMD_HASH
 	imply CRC32_VERIFY
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index f236156..721dafc 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1324,6 +1324,11 @@
 config SYS_ETVPE_CLK
 	int
 	default 1
+
+config MAX_DSP_CPUS
+	int
+	default 12 if ARCH_B4860
+	default 2 if ARCH_B4420
 endif
 
 config SYS_L2_SIZE_256KB
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 1b5b494..edaf8ba 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -23,7 +23,6 @@
 #define CFG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
 
 #elif defined(CONFIG_ARCH_P1010)
-#define CONFIG_FSL_SDHC_V2_3
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	4
 
 #elif defined(CONFIG_ARCH_P1021)
@@ -93,11 +92,9 @@
 #define CFG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 
 #elif defined(CONFIG_ARCH_BSC9131)
-#define CONFIG_FSL_SDHC_V2_3
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	3
 
 #elif defined(CONFIG_ARCH_BSC9132)
-#define CONFIG_FSL_SDHC_V2_3
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	3
 
 #elif defined(CONFIG_ARCH_T4240)
@@ -136,7 +133,6 @@
 #define CFG_SYS_FM_MURAM_SIZE	0x60000
 
 #ifdef CONFIG_ARCH_B4860
-#define CONFIG_MAX_DSP_CPUS		12
 #define CONFIG_NUM_DSP_CPUS		6
 #define CFG_SYS_FSL_CLUSTER_CLOCKS	{ 1, 4, 4, 4 }
 #define CFG_SYS_NUM_FM1_DTSEC	6
@@ -145,7 +141,6 @@
 #define CFG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CFG_SYS_FSL_SRIO_IB_WIN_NUM	5
 #else
-#define CONFIG_MAX_DSP_CPUS		2
 #define CFG_SYS_FSL_CLUSTER_CLOCKS	{ 1, 4 }
 #define CFG_SYS_NUM_FM1_DTSEC	4
 #define CFG_SYS_NUM_FM1_10GEC	0
@@ -173,7 +168,6 @@
 #define CFG_SYS_NUM_FMAN		1
 #define CFG_SYS_NUM_FM1_DTSEC	4
 #define CFG_SYS_NUM_FM1_10GEC	1
-#define CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CFG_SYS_FM1_CLK		0
 #define CONFIG_QBMAN_CLK_DIV		1
@@ -204,7 +198,6 @@
 
 
 #elif defined(CONFIG_ARCH_C29X)
-#define CONFIG_FSL_SDHC_V2_3
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CFG_SYS_FSL_SEC_IDX_OFFSET	0x20000
 
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index e8b2680..09f37ec 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -35,24 +35,6 @@
 #define CFG_SYS_INIT_L3_ADDR		0xbff00000
 #endif
 #endif
-
-#if defined(CONFIG_ARCH_P3041)	||	\
-	defined(CONFIG_ARCH_P4080) ||	\
-	defined(CONFIG_ARCH_P5040) ||	\
-	defined(CONFIG_ARCH_P2041)
-	#define	CONFIG_FSL_TRUST_ARCH_v1
-#endif
-
-#if defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_RAMBOOT)
-/* The key used for verification of next level images
- * is picked up from an Extension Table which has
- * been verified by the ISBC (Internal Secure boot Code)
- * in boot ROM of the SoC.
- * The feature is only applicable in case of NOR boot and is
- * not applicable in case of RAMBOOT (NAND, SD, SPI).
- */
-#define CONFIG_FSL_ISBC_KEY_EXT
-#endif
 #endif /* #ifdef CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_CHAIN_OF_TRUST
diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c
index 285ed9a..bfe6357 100644
--- a/board/freescale/common/fsl_validate.c
+++ b/board/freescale/common/fsl_validate.c
@@ -29,7 +29,7 @@
 #define CHECK_KEY_LEN(key_len)	(((key_len) == 2 * KEY_SIZE_BYTES / 4) || \
 				 ((key_len) == 2 * KEY_SIZE_BYTES / 2) || \
 				 ((key_len) == 2 * KEY_SIZE_BYTES))
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 /* Global data structure */
 static struct fsl_secboot_glb glb;
 #endif
@@ -63,7 +63,7 @@
 	goto self;
 }
 
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 static u32 check_ie(struct fsl_secboot_img_priv *img)
 {
 	if (img->hdr.ie_flag & IE_FLAG_MASK)
@@ -188,7 +188,7 @@
 {
 #ifdef CONFIG_ESBC_HDR_LS
 	/* In LS, No SRK Flag as SRK is always present if IE not present*/
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 	return !check_ie(img);
 #endif
 	return 1;
@@ -278,7 +278,7 @@
 }
 #endif /* CONFIG_ESBC_HDR_LS */
 
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 
 static void install_ie_tbl(uintptr_t ie_tbl_addr,
 		struct fsl_secboot_img_priv *img)
@@ -434,7 +434,7 @@
 	case ERROR_ESBC_CLIENT_HEADER_INVALID_KEY_NUM:
 	case ERROR_ESBC_CLIENT_HEADER_INV_SRK_ENTRY_KEYLEN:
 #endif
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 	/*@fallthrough@*/
 	case ERROR_ESBC_CLIENT_HEADER_IE_KEY_REVOKED:
 	case ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY:
@@ -571,7 +571,7 @@
 		key_hash = 1;
 	}
 #endif
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 	if (!key_hash && check_ie(img))
 		key_hash = 1;
 #endif
@@ -705,7 +705,7 @@
 	}
 #endif
 
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 	if (!key_found && check_ie(img)) {
 		ret = read_validate_ie_tbl(img);
 		if (ret != 0)
@@ -851,7 +851,7 @@
 		return -ENOMEM;
 	memset(img, 0, sizeof(struct fsl_secboot_img_priv));
 
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 	if (glb.ie_addr)
 		img->ie_addr = glb.ie_addr;
 #endif
@@ -952,7 +952,7 @@
 	else
 		ret = memcmp(srk_hash, img->img_key_hash, SHA256_BYTES);
 
-#if defined(CONFIG_FSL_ISBC_KEY_EXT)
+#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT)
 	if (!hash_cmd && check_ie(img))
 		ret = 0;
 #endif
diff --git a/board/google/Kconfig b/board/google/Kconfig
index c57e518..0474b4e 100644
--- a/board/google/Kconfig
+++ b/board/google/Kconfig
@@ -6,6 +6,10 @@
 
 config BIOSEMU
 	bool
+	select X86EMU_RAW_IO
+
+config X86EMU_RAW_IO
+	bool
 
 choice
 	prompt "Mainboard model"
diff --git a/board/samsung/smdkv310/Kconfig b/board/samsung/smdkv310/Kconfig
index a6fd657..cf5ac17 100644
--- a/board/samsung/smdkv310/Kconfig
+++ b/board/samsung/smdkv310/Kconfig
@@ -1,5 +1,8 @@
 if TARGET_SMDKV310
 
+config MIU_2BIT_INTERLEAVED
+	def_bool y
+
 config SYS_BOARD
 	default "smdkv310"
 
diff --git a/board/sysam/stmark2/Kconfig b/board/sysam/stmark2/Kconfig
index 49d0274..b259505 100644
--- a/board/sysam/stmark2/Kconfig
+++ b/board/sysam/stmark2/Kconfig
@@ -6,6 +6,10 @@
 config EXTRA_CLOCK
 	def_bool y
 
+config SERIAL_BOOT
+	def_bool y
+	depends on CF_SBF
+
 config SYS_INPUT_CLKSRC
 	hex
 	default 30000000
diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig
index 8158cd4..b6783ab 100644
--- a/configs/M53017EVB_defconfig
+++ b/configs/M53017EVB_defconfig
@@ -41,6 +41,7 @@
 CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
 CONFIG_FLASH_SHOW_PROGRESS=0
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_SPANSION_S29WS_N=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_MAX_FLASH_SECT=137
diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig
index 5f8a287..1e6cec0 100644
--- a/configs/mccmon6_nor_defconfig
+++ b/configs/mccmon6_nor_defconfig
@@ -69,6 +69,7 @@
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_FLASH_VERIFY=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=25000000
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig
index 651eef5..20b6e03 100644
--- a/configs/mccmon6_sd_defconfig
+++ b/configs/mccmon6_sd_defconfig
@@ -67,6 +67,7 @@
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_FLASH_VERIFY=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=25000000
 CONFIG_SPI_FLASH_SPANSION=y
diff --git a/doc/README.fsl-dpaa b/doc/README.fsl-dpaa
deleted file mode 100644
index 3ef5eeb..0000000
--- a/doc/README.fsl-dpaa
+++ /dev/null
@@ -1,10 +0,0 @@
-This file documents Freescale DPAA-specific options.
-
-FMan (Frame Manager)
-  - CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
-	on SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and MAC as below:
-		10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2
-	on SoCs T1024, etc, the notation between 10GEC and MAC as below:
-		10GEC1->MAC1, 10GEC2->MAC2
-	so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the new SoCs on
-	which 10GEC enumeration is consistent with MAC enumeration.
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 698c91c..5a5a31c 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -825,8 +825,13 @@
 
 endif
 
+config FSL_SDHC_V2_3
+	bool
+
 config FSL_ESDHC
 	bool "Freescale/NXP eSDHC controller support"
+	select FSL_SDHC_V2_3 if ARCH_P1010 || ARCH_BSC9131 || ARCH_BSC9132 \
+		|| ARCH_C29X
 	help
 	  This selects support for the eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 04ae456..af45ef0 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -119,6 +119,13 @@
 	bool "Enable displaying empty sectors in flash info"
 	depends on FLASH_CFI_DRIVER
 
+config FLASH_SPANSION_S29WS_N
+	bool "Non-standard s29ws-n MirrorBit flash"
+	depends on FLASH_CFI_DRIVER
+	help
+	  Enable this if the s29ws-n MirrorBit flash has non-standard addresses
+	  for buffered write commands.
+
 config FLASH_CFI_MTD
 	bool "Enable CFI MTD driver"
 	depends on FLASH_CFI_DRIVER
@@ -156,6 +163,18 @@
 	  If the variable flashchecksum is set in the environment, perform a CRC
 	  of the flash and print the value to console.
 
+config FLASH_VERIFY
+	bool "Compare writes to NOR flash with source location"
+	depends on MTD_NOR_FLASH
+	help
+	  If enabled, the content of the flash (destination) is compared
+	  against the source after the write operation. An error message will
+	  be printed when the contents are not identical.  Please note that
+	  this option is useless in nearly all cases, since such flash
+	  programming errors usually are detected earlier while
+	  unprotecting/erasing/programming. Please only enable this option if
+	  you really know what you are doing.
+
 config ALTERA_QSPI
 	bool "Altera Generic Quad SPI Controller"
 	depends on DM_MTD
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0607f95..53fb69f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -372,6 +372,7 @@
 	select SYS_FMAN_V3 if ARCH_B4420 || ARCH_B4860 || ARCH_LS1043A || \
 		ARCH_LS1046A || ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || \
 		ARCH_T2080 || ARCH_T4240
+	select FSL_FM_10GEC_REGULAR_NOTATION if ARCH_T1024
 	help
 	  This driver support the Freescale FMan Ethernet controller
 
@@ -391,6 +392,18 @@
 	help
 	  SoC has FMan v3 with mEMAC
 
+config FSL_FM_10GEC_REGULAR_NOTATION
+	bool
+	help
+	  On SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and
+	  MAC as below:
+		10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2
+	  While on SoCs T1024, etc, the notation between 10GEC and MAC as below:
+		10GEC1->MAC1, 10GEC2->MAC2
+	  so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the
+	  new SoCs on which 10GEC enumeration is consistent with MAC
+	  enumeration.
+
 config FTMAC100
 	bool "Ftmac100 Ethernet Support"
 	help
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
index 42b74ae..439ed93 100644
--- a/include/configs/M53017EVB.h
+++ b/include/configs/M53017EVB.h
@@ -93,7 +93,6 @@
  * FLASH organization
  */
 #ifdef CONFIG_SYS_FLASH_CFI
-#	define CONFIG_FLASH_SPANSION_S29WS_N	1
 #	define CFG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
 #endif
 
diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h
index 823d37f..e9b85b4 100644
--- a/include/configs/conga-qeval20-qa3-e3845.h
+++ b/include/configs/conga-qeval20-qa3-e3845.h
@@ -17,7 +17,6 @@
 					"stderr=serial\0"
 
 #define VIDEO_IO_OFFSET				0
-#define CONFIG_X86EMU_RAW_IO
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS				\
diff --git a/include/configs/dfi-bt700.h b/include/configs/dfi-bt700.h
index 52f2d50..154c4f4 100644
--- a/include/configs/dfi-bt700.h
+++ b/include/configs/dfi-bt700.h
@@ -21,7 +21,6 @@
 					"stderr=serial\0"
 
 #define VIDEO_IO_OFFSET				0
-#define CONFIG_X86EMU_RAW_IO
 
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS				\
diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h
index c9e0c13..8f2dac6 100644
--- a/include/configs/exynos5-dt-common.h
+++ b/include/configs/exynos5-dt-common.h
@@ -17,6 +17,5 @@
 
 #define CFG_SYS_SPI_BASE	0x12D30000
 #define FLASH_SIZE		(4 << 20)
-#define CONFIG_SPI_BOOTING
 
 #endif
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
index 7c401a2..a7f5507 100644
--- a/include/configs/mccmon6.h
+++ b/include/configs/mccmon6.h
@@ -25,7 +25,6 @@
 
 /* NOR 16-bit mode */
 #define CFG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
-#define CONFIG_FLASH_VERIFY
 
 /* NOR Flash MTD */
 #define CFG_SYS_FLASH_BANKS_LIST	{ (CFG_SYS_FLASH_BASE) }
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
index 50c52f8..6c15c72 100644
--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -18,6 +18,5 @@
 					"usb_pgood_delay=40\0"
 
 #define VIDEO_IO_OFFSET				0
-#define CONFIG_X86EMU_RAW_IO
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index af0c820..601c16e 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -34,9 +34,6 @@
 
 /* FLASH and environment organization */
 
-/* MIU (Memory Interleaving Unit) */
-#define CONFIG_MIU_2BIT_INTERLEAVED
-
 #define RESERVE_BLOCK_SIZE		(512)
 #define BL1_SIZE			(16 << 10) /*16 K reserved for BL1*/
 
diff --git a/include/configs/som-db5800-som-6867.h b/include/configs/som-db5800-som-6867.h
index ee038d8..f097092 100644
--- a/include/configs/som-db5800-som-6867.h
+++ b/include/configs/som-db5800-som-6867.h
@@ -17,6 +17,5 @@
 					"stderr=serial,vidconsole\0"
 
 #define VIDEO_IO_OFFSET				0
-#define CONFIG_X86EMU_RAW_IO
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h
index faff8d6..f81cef0 100644
--- a/include/configs/stmark2.h
+++ b/include/configs/stmark2.h
@@ -63,10 +63,6 @@
 
 #define CFG_SYS_DRAM_TEST
 
-#if defined(CONFIG_CF_SBF)
-#define CONFIG_SERIAL_BOOT
-#endif
-
 /* Reserve 256 kB for Monitor */
 
 /*
diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h
index af0a095..b57b1be 100644
--- a/include/configs/theadorable-x86-common.h
+++ b/include/configs/theadorable-x86-common.h
@@ -16,7 +16,6 @@
 					"stderr=serial\0"
 
 #define VIDEO_IO_OFFSET				0
-#define CONFIG_X86EMU_RAW_IO
 
 /* Environment settings */
 
diff --git a/include/configs/x86-chromebook.h b/include/configs/x86-chromebook.h
index ec87edd..9df3bfd 100644
--- a/include/configs/x86-chromebook.h
+++ b/include/configs/x86-chromebook.h
@@ -11,7 +11,6 @@
 #define CONFIG_X86_REFCODE_RUN_ADDR		0
 
 #define VIDEO_IO_OFFSET				0
-#define CONFIG_X86EMU_RAW_IO
 
 #define CONFIG_STD_DEVICES_SETTINGS	"stdin=usbkbd,i8042-kbd,serial\0" \
 					"stdout=vidconsole,serial\0" \